{"title":"Rubber Supports for OMCN Automotive Lifts","description":"\u003csection\u003e\n\u003cp\u003eOMCN S.p.A. is an Italian manufacturer of workshop and industrial equipment based in Villa di Serio near Bergamo. The brand has been active in the workshop equipment sector since 1958 and offers a wide range of automotive lifts, industrial equipment, motorcycle lifts, mobile wheel grippers and accessories.\u003c\/p\u003e\n\u003cp\u003eFor OMCN automotive lifts, we offer suitable rubber pads, rubber supports, rubber lift supports, rubber lift pads, support plates, adapters and support plate rubbers for various models. The two-post lifts of the OMCN 199 series are particularly relevant, as many workshops specifically search for rubber pads, support plates and support plate rubbers for these models.\u003c\/p\u003e\n\u003cp\u003eAt Böck®, you will find durable premium rubber pads and robust rubber supports for OMCN automotive lifts. Many common versions are available immediately and can be conveniently ordered online. The model list provides an initial guide. However, a reliable selection should always be made by comparing the existing support plate, its dimensions and the technical drawing on the respective product page.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eCompatible Models\u003c\/h2\u003e\n\u003cp\u003eFor these OMCN models, we offer suitable rubber pads, rubber supports, adapters or relevant replacement part options. The list serves as a guide when searching for the correct support plate rubber, rubber lift support, adapter or suitable support plate.\u003c\/p\u003e\n\u003ch3\u003eOMCN 199 Series, Electrohydraulic Two-Post Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e199\/YL\u003c\/li\u003e\n\u003cli\u003e199\/YP\u003c\/li\u003e\n\u003cli\u003e199\/V\u003c\/li\u003e\n\u003cli\u003e199\/W\u003c\/li\u003e\n\u003cli\u003e199\/X\u003c\/li\u003e\n\u003cli\u003e199\/WRX\u003c\/li\u003e\n\u003cli\u003e199\/WL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOMCN 199 Series, Electromechanical Two-Post Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e199\/U\u003c\/li\u003e\n\u003cli\u003e199\/UE\u003c\/li\u003e\n\u003cli\u003e199\/DELTA\u003c\/li\u003e\n\u003cli\u003e199\/BETA\u003c\/li\u003e\n\u003cli\u003e199\/GK\u003c\/li\u003e\n\u003cli\u003e199\/GAMMA\u003c\/li\u003e\n\u003cli\u003e199\/ALFA\u003c\/li\u003e\n\u003cli\u003e199\/R\u003c\/li\u003e\n\u003cli\u003e199\/RX\u003c\/li\u003e\n\u003cli\u003e199\/RY\u003c\/li\u003e\n\u003cli\u003e199\/T\u003c\/li\u003e\n\u003cli\u003e199\/TE\u003c\/li\u003e\n\u003cli\u003e199\/RL\u003c\/li\u003e\n\u003cli\u003e199\/DK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsed-Market Spellings and Older Designations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e199U\u003c\/li\u003e\n\u003cli\u003e199\/C\u003c\/li\u003e\n\u003cli\u003e199 C\u003c\/li\u003e\n\u003cli\u003e199UE2\u003c\/li\u003e\n\u003cli\u003e199\/gk3\u003c\/li\u003e\n\u003cli\u003e199\/GK3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOMCN Accessory Numbers for Adapters, Rubber Pads and Supports\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e370\u003c\/li\u003e\n\u003cli\u003e370\/A\u003c\/li\u003e\n\u003cli\u003e370\/B\u003c\/li\u003e\n\u003cli\u003e370\/C\u003c\/li\u003e\n\u003cli\u003e370\/D\u003c\/li\u003e\n\u003cli\u003e370\/E\u003c\/li\u003e\n\u003cli\u003e370\/F\u003c\/li\u003e\n\u003cli\u003eA370\u003c\/li\u003e\n\u003cli\u003eB370\u003c\/li\u003e\n\u003cli\u003eC370\u003c\/li\u003e\n\u003cli\u003eA199\/R\u003c\/li\u003e\n\u003cli\u003eB199\/R\u003c\/li\u003e\n\u003cli\u003eC199\/R\u003c\/li\u003e\n\u003cli\u003eD199\/R\u003c\/li\u003e\n\u003cli\u003eE199\/R\u003c\/li\u003e\n\u003cli\u003eF199\/R\u003c\/li\u003e\n\u003cli\u003eG199\/R\u003c\/li\u003e\n\u003cli\u003eH199\/R\u003c\/li\u003e\n\u003cli\u003eI199\/R\u003c\/li\u003e\n\u003cli\u003eJ199\/R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInground and Piston Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2035\/XY\u003c\/li\u003e\n\u003cli\u003e2035\/L\u003c\/li\u003e\n\u003cli\u003e2055\/L\u003c\/li\u003e\n\u003cli\u003e2000\/C\u003c\/li\u003e\n\u003cli\u003e2000\/E\u003c\/li\u003e\n\u003cli\u003e2000\/F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDouble-Scissor, Short-Rise and Bodywork Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e705\u003c\/li\u003e\n\u003cli\u003e705\/M\u003c\/li\u003e\n\u003cli\u003e730\u003c\/li\u003e\n\u003cli\u003e718\u003c\/li\u003e\n\u003cli\u003e719\u003c\/li\u003e\n\u003cli\u003e718\/M\u003c\/li\u003e\n\u003cli\u003e719\/M\u003c\/li\u003e\n\u003cli\u003e551\u003c\/li\u003e\n\u003cli\u003e551\/I\u003c\/li\u003e\n\u003cli\u003e552\u003c\/li\u003e\n\u003cli\u003e553\u003c\/li\u003e\n\u003cli\u003e541\u003c\/li\u003e\n\u003cli\u003e541\/IP\u003c\/li\u003e\n\u003cli\u003e543\u003c\/li\u003e\n\u003cli\u003e540\/A\u003c\/li\u003e\n\u003cli\u003e550\u003c\/li\u003e\n\u003cli\u003e550\/A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eScissor Lifts and X-LINE Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e820\u003c\/li\u003e\n\u003cli\u003e821\u003c\/li\u003e\n\u003cli\u003e822\u003c\/li\u003e\n\u003cli\u003e823\u003c\/li\u003e\n\u003cli\u003e824\u003c\/li\u003e\n\u003cli\u003e825\u003c\/li\u003e\n\u003cli\u003e826\u003c\/li\u003e\n\u003cli\u003e800\u003c\/li\u003e\n\u003cli\u003e801\u003c\/li\u003e\n\u003cli\u003e802\u003c\/li\u003e\n\u003cli\u003e803\u003c\/li\u003e\n\u003cli\u003e804\u003c\/li\u003e\n\u003cli\u003e805\u003c\/li\u003e\n\u003cli\u003e810\u003c\/li\u003e\n\u003cli\u003e811\u003c\/li\u003e\n\u003cli\u003e812\u003c\/li\u003e\n\u003cli\u003e813\u003c\/li\u003e\n\u003cli\u003e814\u003c\/li\u003e\n\u003cli\u003e815\u003c\/li\u003e\n\u003cli\u003e890\u003c\/li\u003e\n\u003cli\u003e891\u003c\/li\u003e\n\u003cli\u003e892\u003c\/li\u003e\n\u003cli\u003e893\u003c\/li\u003e\n\u003cli\u003e894\u003c\/li\u003e\n\u003cli\u003e895\u003c\/li\u003e\n\u003cli\u003e896\u003c\/li\u003e\n\u003cli\u003eX-LINE 860\u003c\/li\u003e\n\u003cli\u003eX-LINE 861\u003c\/li\u003e\n\u003cli\u003eX-LINE 862\u003c\/li\u003e\n\u003cli\u003eX-LINE 863\u003c\/li\u003e\n\u003cli\u003eX-LINE 864\u003c\/li\u003e\n\u003cli\u003eX-LINE 865\u003c\/li\u003e\n\u003cli\u003eX-LINE 866\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOMCN Rubber Supports for Scissor Lifts and X-LINE Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e715\u003c\/li\u003e\n\u003cli\u003e715\/A\u003c\/li\u003e\n\u003cli\u003e715\/B\u003c\/li\u003e\n\u003cli\u003e715\/C\u003c\/li\u003e\n\u003cli\u003e715\/D\u003c\/li\u003e\n\u003cli\u003e715\/E\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFour-Post Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e401\u003c\/li\u003e\n\u003cli\u003e401\/I\u003c\/li\u003e\n\u003cli\u003e401\/L\u003c\/li\u003e\n\u003cli\u003e401\/C\u003c\/li\u003e\n\u003cli\u003e401\/CSAI\u003c\/li\u003e\n\u003cli\u003e402\/LS\u003c\/li\u003e\n\u003cli\u003e403\u003c\/li\u003e\n\u003cli\u003e403\/LS\u003c\/li\u003e\n\u003cli\u003e403\/LSI\u003c\/li\u003e\n\u003cli\u003e403\/BSAI\u003c\/li\u003e\n\u003cli\u003e403\/C\u003c\/li\u003e\n\u003cli\u003e403\/CSAI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHeavy-Duty Commercial Vehicle Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e405\u003c\/li\u003e\n\u003cli\u003e406\u003c\/li\u003e\n\u003cli\u003e407\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommercial Vehicle Scissor Lifts and Coupled Systems\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e900\u003c\/li\u003e\n\u003cli\u003e901\u003c\/li\u003e\n\u003cli\u003e902\u003c\/li\u003e\n\u003cli\u003e903\u003c\/li\u003e\n\u003cli\u003e904\u003c\/li\u003e\n\u003cli\u003e905\u003c\/li\u003e\n\u003cli\u003e906\u003c\/li\u003e\n\u003cli\u003e907\u003c\/li\u003e\n\u003cli\u003e908\u003c\/li\u003e\n\u003cli\u003e909\u003c\/li\u003e\n\u003cli\u003e910\u003c\/li\u003e\n\u003cli\u003e911\u003c\/li\u003e\n\u003cli\u003e912\u003c\/li\u003e\n\u003cli\u003e913\u003c\/li\u003e\n\u003cli\u003e914\u003c\/li\u003e\n\u003cli\u003e915\u003c\/li\u003e\n\u003cli\u003e916\u003c\/li\u003e\n\u003cli\u003e917\u003c\/li\u003e\n\u003cli\u003e918\u003c\/li\u003e\n\u003cli\u003e910+910\u003c\/li\u003e\n\u003cli\u003e911+911\u003c\/li\u003e\n\u003cli\u003e912+912\u003c\/li\u003e\n\u003cli\u003e913+913\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMobile Wheel Grippers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e952\u003c\/li\u003e\n\u003cli\u003e953\u003c\/li\u003e\n\u003cli\u003e953\/A\u003c\/li\u003e\n\u003cli\u003e953\/B\u003c\/li\u003e\n\u003cli\u003e959\u003c\/li\u003e\n\u003cli\u003e959\/A\u003c\/li\u003e\n\u003cli\u003e959\/B\u003c\/li\u003e\n\u003cli\u003e963\u003c\/li\u003e\n\u003cli\u003e963\/A\u003c\/li\u003e\n\u003cli\u003e963\/B\u003c\/li\u003e\n\u003cli\u003e995+983\/FM\u003c\/li\u003e\n\u003cli\u003e995\/A+983\/FM\u003c\/li\u003e\n\u003cli\u003e995\/B+983\/FM\u003c\/li\u003e\n\u003cli\u003e995W+983\/FM\u003c\/li\u003e\n\u003cli\u003e995W\/A+983\/FM\u003c\/li\u003e\n\u003cli\u003e995W\/B+983\/FM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMotorcycle Lifts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e196\/P\u003c\/li\u003e\n\u003cli\u003e196\/PI\u003c\/li\u003e\n\u003cli\u003e196\/PL\u003c\/li\u003e\n\u003cli\u003e196\/PL-SP\u003c\/li\u003e\n\u003cli\u003e196\/MS\u003c\/li\u003e\n\u003cli\u003e196\/MS-SP\u003c\/li\u003e\n\u003cli\u003e196\/NS\u003c\/li\u003e\n\u003cli\u003e196\/OS\u003c\/li\u003e\n\u003cli\u003e196\/OSL\u003c\/li\u003e\n\u003cli\u003e196\/OSL-SP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Dimension and Replacement-Part Search Terms\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOMCN rubber buffer 140 mm\u003c\/li\u003e\n\u003cli\u003eOMCN rubber buffer 145 mm\u003c\/li\u003e\n\u003cli\u003eOMCN Tamponi gomma\u003c\/li\u003e\n\u003cli\u003eOMCN rubber pads\u003c\/li\u003e\n\u003cli\u003eOMCN load-bearing nut\u003c\/li\u003e\n\u003cli\u003eOMCN lifting nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eHow to Choose the Correct Rubber Pad for OMCN 199\u003c\/h2\u003e\n\u003cp\u003eFor OMCN, the exact model designation is particularly important because the 199 series includes many different versions. A rubber support for 199\/U does not necessarily fit 199\/UE, 199\/GK, 199\/R, 199\/YL, 199\/X or 199\/WL. Accessory numbers such as 370, 370\/B, 370\/D, A199\/R or I199\/R should also always be compared with the existing adapter or support plate.\u003c\/p\u003e\n\u003cp\u003eRubber pads and support plate rubbers for the models 199\/YL, 199\/YP, 199\/V, 199\/W, 199\/X, 199\/WRX, 199\/WL, 199\/U, 199\/UE, 199\/GK, 199\/GAMMA, 199\/ALFA, 199\/R, 199\/RX and 199\/RY are particularly frequently requested. For these automotive lifts, the diameter, height, support plate shape, pin, thread, hole pattern and mounting system are decisive.\u003c\/p\u003e\n\u003cp\u003eOn the used-equipment market, OMCN model numbers are often written differently. For example, 199\/U may be written as 199U, 199\/C as 199 C, and 199\/GK as 199\/gk3 or 199\/GK3. For correct technical identification, however, the information on the nameplate and the lifting support actually installed on the automotive lift are always decisive.\u003c\/p\u003e\n\u003cp\u003eAs differences may occur depending on the year of manufacture, version or installed support plate, you should always measure the existing support plate yourself before ordering. Compare the dimensions with the technical drawings and measurements on the respective product page. This helps prevent incorrect orders and makes it much easier to reliably identify the correct rubber support for your OMCN automotive lift.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOMCN Rubber Supports for Scissor Lifts and X-LINE\u003c\/h2\u003e\n\u003cp\u003eIn addition to the 199 series, OMCN scissor lifts, double-scissor lifts, short-rise models and X-LINE lifts are particularly relevant. These often do not require conventional round rubber pads, but rather rectangular rubber supports, rubber blocks, support pads or special supports for bodywork and service applications.\u003c\/p\u003e\n\u003cp\u003eFor OMCN scissor lifts and X-LINE models, the rubber supports 715, 715\/A, 715\/B, 715\/C, 715\/D and 715\/E are important search and replacement-part numbers. Depending on the lift, vehicle type and lifting point, different heights, widths and contact surfaces may be suitable.\u003c\/p\u003e\n\u003cp\u003eAt Böck®, you will find a wide selection of robust rubber blocks and rubber supports for scissor lifts. These include different heights, wide standard supports for everyday workshop use, special blocks for electric vehicles and versions with smaller lifting surfaces for vehicles with narrow or small lifting points. The decisive factor remains the comparison with the lift, platform and vehicle lifting point.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOMCN Support Plates, Adapters and Accessory Numbers\u003c\/h2\u003e\n\u003cp\u003eOMCN uses its own accessory numbers for many supports and adapters. These include 370, 370\/A, 370\/B, 370\/C, 370\/D, 370\/E, 370\/F, A370, B370, C370 as well as the 199\/R accessory numbers A199\/R, B199\/R, C199\/R, D199\/R, E199\/R, F199\/R, G199\/R, H199\/R, I199\/R and J199\/R.\u003c\/p\u003e\n\u003cp\u003eThese numbers are very useful when searching for replacement parts, but should not be considered in isolation. An adapter, rectangular rubber support, wedge-shaped rubber support or support plate must match the existing lift, lifting arm and support design. Especially with older 199 models, it is advisable to check the nameplate and the existing support plate.\u003c\/p\u003e\n\u003cp\u003eSearch terms such as OMCN Tamponi gomma, OMCN rubber pads, OMCN rubber buffer 140 mm or OMCN rubber buffer 145 mm can also be helpful when searching for replacement parts. However, these terms from the replacement-parts market do not provide a general guarantee of compatibility. The dimensions and design of the existing part remain decisive.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eImportant Information Before Ordering\u003c\/h2\u003e\n\u003cp\u003eFor reliable identification, we require photos of the automotive lift’s nameplate, a top-view photo of the existing rubber pad and the dimensions of the support plate.\u003c\/p\u003e\n\u003cp\u003eThe most important measurements are the diameter and height and, if the rubber pad has more than one hole, the centre-to-centre hole spacing. For rectangular rubber supports, wedge-shaped rubber supports or rubber blocks, the length, width and height are also helpful. For support plates and adapters, the pin, thread, bore, groove, support plate shape and mounting type are also important.\u003c\/p\u003e\n\u003cp\u003ePhotos of the old rubber part from above, below and from the side are also helpful, as are details of the model number, serial number, lifting capacity and condition of the old rubber support. The more precise this information is, the more reliably we can identify the correct Böck® rubber pad or Böck® rubber support for your OMCN automotive lift.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eBöck® Quality for OMCN Automotive Lifts\u003c\/h2\u003e\n\u003cp\u003eRubber pads, support plate rubbers, adapter supports and rubber blocks are wear parts that are subjected to regular loads in everyday workshop use. They protect the vehicle’s lifting points, improve the contact surface and replace worn or damaged supports on the automotive lift.\u003c\/p\u003e\n\u003cp\u003eAt Böck®, we focus on durable materials, clean workmanship and high load capacity for everyday use. Our premium rubber pads for OMCN automotive lifts are designed to be robust and suitable for regular workshop operation.\u003c\/p\u003e\n\u003cp\u003eMany common rubber supports for OMCN 199 lifts, scissor lifts and X-LINE applications are available immediately. This allows worn supports to be replaced quickly and conveniently ordered online. For reliable ordering, we always recommend comparing the existing part with the dimensions provided on the product page.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1. Which OMCN rubber pads fit the 199 series?\u003c\/strong\u003e\u003cbr\u003eThe model version, nameplate, support plate and dimensions of the existing rubber support are decisive. The 199 series includes models such as 199\/YL, 199\/YP, 199\/V, 199\/W, 199\/X, 199\/U, 199\/UE, 199\/GK, 199\/R, 199\/RX and 199\/RY. Always compare the diameter, height, hole pattern, pin or thread with the existing part.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2. Are accessory numbers such as OMCN 370 or A199\/R sufficient for identification?\u003c\/strong\u003e\u003cbr\u003eThese numbers are very helpful, but are not always sufficient on their own. Depending on the automotive lift, year of manufacture and lifting support, adapters, wedge-shaped rubber supports, support plates or rectangular rubber supports may differ. The dimensions and existing lifting support should always be checked.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3. Which rubber supports are suitable for OMCN scissor lifts?\u003c\/strong\u003e\u003cbr\u003eFor OMCN scissor lifts, 715, 715\/A, 715\/B, 715\/C, 715\/D and 715\/E are particularly relevant. Depending on the intended use, vehicle to be lifted and individual requirements, Böck® offers many rubber blocks in different heights, shapes and contact surfaces. Rubber blocks for electric vehicles or vehicles with small lifting points are also available.\u003cbr\u003e\u003ca title=\"Here you can find an overview of the complete range of rubber blocks for automotive scissor lifts\" href=\"https:\/\/boeck-gmbo.shop\/collections\/auflagen-rampen-gummiklotze-fur-kfz-hebebuhnen?_pos=1\u0026amp;amp;_psq=gummikl\u0026amp;amp;_ss=e\u0026amp;amp;_v=1.0\"\u003eView the Böck® rubber block range\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e","products":[{"product_id":"gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-143-mm","title":"Rubber pad suitable for OMCN lifts diameter 143 mm","description":"\u003ch3\u003ePremium Rubber Pad as a Proven Standard Model for OMCN Lifts\u003c\/h3\u003e\n\u003cp\u003eThe OMCN-140 rubber pad is a common spare part for many OMCN 2-post lifts and is successfully used in professional workshops.\u003c\/p\u003e\n\u003ch3\u003eRobust Design for Safe Use\u003c\/h3\u003e\n\u003cp\u003eDue to its special design, this model is suitable for OMCN lifts with the corresponding support plate mount. The rubber pad ensures a stable fit and secure positioning on the support plate.\u003c\/p\u003e\n\u003ch3\u003eTextured Surface for Optimal Grip\u003c\/h3\u003e\n\u003cp\u003eThe profiled surface provides additional slip resistance when lifting vehicles. This ensures even force transmission and improves contact with the vehicle.\u003c\/p\u003e\n\u003ch3\u003eHigh-Quality Rubber Compound\u003c\/h3\u003e\n\u003cp\u003eThe Böck rubber compound used is particularly abrasion-resistant and designed for heavy loads. It offers a balanced combination of elasticity and stability. The rubber pad adapts easily to the lifting point and returns to its original shape after pressure is released.\u003c\/p\u003e\n\u003cp\u003eThe material is resistant to oil and operating fluids in the workshop environment. It remains permanently flexible and shatter-proof, even with intensive use.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTextured surface for a secure grip\u003c\/li\u003e\n\u003cli\u003eEven force distribution at the lifting point\u003c\/li\u003e\n\u003cli\u003eAbrasion-resistant, long-lasting rubber compound\u003c\/li\u003e\n\u003cli\u003eResistant to oil and environmental influences\u003c\/li\u003e\n\u003cli\u003eFlexible and shatter-proof under heavy loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Selection Note\u003c\/h3\u003e\n\u003cp\u003eThis rubber pad differs in design from the OMCN-140-002. Please check the dimensions before ordering to ensure which rubber pad is correct for your OMCN lift.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/boeck-gmbo.shop\/en\/products\/gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-140-mm\" title=\"Rubber pad suitable for OMCN lifts diameter 140 mm\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/files\/OMCN-140-002.png?v=1736521632\" alt=\"Front view of a black, round rubber pad (item number OMCN-140-002) for vehicle lifts, with a rubber lip for slipping over the support plate and for bolting to it.\" width=\"147\" height=\"98\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/boeck-gmbo.shop\/en\/products\/gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-140-mm\" title=\"Rubber pad suitable for OMCN lifts diameter 140 mm\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/files\/OMCN-140-002_rck.png?v=1758755953\" alt=\"\" width=\"149\" height=\"99\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/boeck-gmbo.shop\/en\/products\/gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-140-mm\" title=\"Rubber pad suitable for OMCN lifts diameter 140 mm\" rel=\"noopener\" target=\"_blank\"\u003eView OMCN rubber pad Ø 140 mm\u003c\/a\u003e\u003c\/p\u003e","brand":"Boeck","offers":[{"title":"Default Title","offer_id":47302855917876,"sku":"OMCN-140","price":10.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/files\/OMCN-140.png?v=1736521632"},{"product_id":"gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-140-mm","title":"Rubber pad suitable for OMCN lifts diameter 140 mm","description":"\u003ch3\u003ePremium Rubber Pad for OMCN Lifts\u003c\/h3\u003e\n\u003cp\u003eThis high-quality rubber pad is suitable for many OMCN models and is ideal for professional workshop use on 2-post lifts.\u003c\/p\u003e\n\u003ch3\u003ePerfect Fit Through Precise Nubs\u003c\/h3\u003e\n\u003cp\u003eThere are three nubs on the back that fit exactly into the openings of the support plate. This ensures the rubber pad is securely positioned and reliably fixed against slipping. Additionally, it features a central hole for optional bolting.\u003c\/p\u003e\n\u003ch3\u003eStructured Surface for a Secure Grip\u003c\/h3\u003e\n\u003cp\u003eThe special surface pattern improves stability when lifting vehicles. It increases slip resistance and ensures even force distribution at the lifting point.\u003c\/p\u003e\n\u003ch3\u003eHigh-Quality Rubber Compound for Daily Workshop Use\u003c\/h3\u003e\n\u003cp\u003eThe rubber compound used is particularly robust and abrasion-resistant. It offers an optimal combination of stability and elasticity. The lifting points sink in slightly, and after unloading, the rubber pad returns to its original shape.\u003c\/p\u003e\n\u003cp\u003eThe material is resistant to oil, weathering, and temperature fluctuations. It remains permanently flexible, odorless, and shatterproof even under intensive use.\u003c\/p\u003e\n\u003ch3\u003eAdvantages at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNubs fit exactly into the support plate openings\u003c\/li\u003e\n\u003cli\u003eSecure fit without slipping\u003c\/li\u003e\n\u003cli\u003eCenter hole for optional bolting\u003c\/li\u003e\n\u003cli\u003eStructured surface for high slip resistance\u003c\/li\u003e\n\u003cli\u003eAbrasion-resistant, long-lasting rubber compound\u003c\/li\u003e\n\u003cli\u003eResistant to oil and environmental influences\u003c\/li\u003e\n\u003cli\u003eFlexible and shatterproof even under high loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Rubber Pad for OMCN\u003c\/h3\u003e\n\u003cp\u003eAnother common model for OMCN 2-post lifts is the rubber pad \u003ca href=\"https:\/\/boeck-gmbo.shop\/en\/products\/gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-143-mm\" title=\"Rubber pad suitable for OMCN lifts diameter 143 mm\"\u003eOMCN-140\u003c\/a\u003e with Ø 143 mm. This model differs in design from the OMCN-140-002.\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Rubber pad suitable for OMCN lifts diameter 143 mm\" href=\"https:\/\/boeck-gmbo.shop\/en\/products\/gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-143-mm\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/files\/OMCN-140.png?v=1736521632\" alt=\"Front view of a black, round rubber pad (item number OMCN-140) for vehicle lifts, with a hole in the middle for bolting to the support plate.\" width=\"137\" height=\"92\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/files\/OMCN-140_rck.png?v=1758755962\" alt=\"\" width=\"137\" height=\"91\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/boeck-gmbo.shop\/en\/products\/gummiteller-passend-fuer-omcn-hebebuehnen-durchmesser-143-mm\" target=\"_blank\"\u003eView OMCN Rubber Pad Ø 143 mm\u003c\/a\u003e\u003c\/p\u003e","brand":"Boeck","offers":[{"title":"Default Title","offer_id":47302856114484,"sku":"OMCN-140-002","price":10.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/files\/OMCN-140-002.png?v=1736521632"},{"product_id":"ausgleichsplatte-550-x-400-x-50-mm","title":"Compensation plate 550 x 400 x 50 mm","description":"The compensation plate AP-GMY.550.400.H50 was developed by us for all road scissor and 4-post lifts with wheel alignment module. The plate serves as a leveler in the lift track when the wheel alignment rotating plate is temporarily removed to prevent wear. It also replaces the original, expensive metal compensation plates. Advantage: Noise is avoided when driving over, and there is no disturbing background noise when checking the axle and steering play, which makes error analysis more difficult. The service life of the roadway lift is also extended because its coating cannot be damaged by the sharp edges of the metal compensation plates. Corrosion, which is often promoted by (salt) water, can be reliably prevented in this way.\u003cbr\u003e\u003cbr\u003e \nThe compensation plates are made of petrol and oil-resistant, high-density rubber granules. Thanks to their high specific weight, the panels lie firmly in place without the need for additional fastening. A handle embedded in the edge makes handling the compensation plates easier. With this, the plates, which fit precisely into the road recess, can be easily removed from the lift and hung on a wall to save space.\u003cbr\u003e\u003cbr\u003e\n We offer our compensation plates in many other sizes for your roadway lift (see overview: Compensation plates). If the right size is not included, we will make desired sizes for you upon request.\u003cbr\u003e\u003cbr\u003e","brand":"Boeck","offers":[{"title":"Default Title","offer_id":47302866534708,"sku":"AP-GMY.550.400.H50","price":56.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/files\/AP-GMY.550.400.H50_side.png?v=1759217873"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/3462\/4564\/collections\/OMCN-140.png?v=1783073779","url":"https:\/\/boeck-gmbo.shop\/en\/collections\/rubber-supports-omcn.oembed","provider":"Böck GmbH","version":"1.0","type":"link"}