HERRMANN is a German manufacturer of vehicle lifting equipment headquartered in Pösing, Bavaria. According to the company, Herrmann AG is a medium-sized mechanical engineering company founded in 1971 by Johannes Herrmann. The company specializes in lifting equipment for passenger cars and light commercial vehicles, primarily for professional automotive workshops.
At Böck®, we offer matching rubber pads, rubber support pads, rubber lift pads, rubber blocks, lifting pads, plug-in adapters and support pad rubbers for a wide range of HERRMANN lift models. Particular attention is given to current in-ground lifts as well as older two-post lifts that are still widely used in automotive workshops.
At Böck® you will find premium replacement rubber pads for HERRMANN lifts to replace worn or damaged lifting pads. The model list provides an initial guide, but the correct selection should always be based on the dimensions, the existing support pad and the technical drawing shown on the respective product page.
Compatible models
We supply matching rubber pads, rubber support pads and other compatible replacement parts for the following HERRMANN lift models. The model names are intended as a guide when searching for the correct rubber lift pad, lifting pad, plug-in adapter or support pad rubber.
Single-piston in-ground lifts and flat-track systems
- Uni 1.35 DZ H plus
- Uni 1.35 DZ H plus midi
- Uni 1.35 DZ H plus maxi
- Swingarm 1.35 DZ X
Two-piston in-ground lifts and Uni models
- Uni 2.35 plus
- Uni 2.35 plus mini
- Uni 2.35 plus midi
- Uni 2.35 plus maxi
- Uni 2.35 plus Hybrid
Swing-arm in-ground lifts and Multiarm models
- Swingarm 2.35
- Swingarm 2.35-2530
- Multiarm 2.40
- Swingarm 2.50
- Duplex 4.55
- Duplex 4.65
Runway in-ground lifts and Alu Track models
- Alu Track 2.35
- Alu Track 2.50
- Alu Track 4.40
- Alu Track 4.65
- Alu Track 4.40/2.35
- Alu Track 4.40/2.35-2685
Older two-post lifts and replacement part models
- Eco Lift 2.35
- EcoLift 2.35
- Ecolift 2.35
- ECO Lift 2.35
- Eco 235
- Eco Lift 2.30
- EL 2.35
- EL235
- EL235M
- W EL 235
- PL 2.30A
- PL 2.30C
- PL 2.35
- Aqualift 3000
- Aqua Lift Uni 2.35 plus maxi
- Sport 2.35-2285
- Swingarm Lift 2.35
- Vario-Lift 2.35
- JIB Lift 2.35
Relevant lifting pads and accessories
- 70 mm rubber pyramid
- 140 mm rubber pyramid
- 120 × 120 × 40 mm rubber pad
- 290 × 335 × 20 mm rubber pad
- Plug-in adapter
- Plug-in adapter extension
- V-block
- NCV3 pin
- U-shaped support
- Wheel gripper support
- pushAdapter
Choosing the correct rubber pad for HERRMANN lifts
Selecting the correct rubber pad is particularly important for HERRMANN lifts, as different lift types use different lifting systems. A rubber support pad for a Uni 2.35 plus is not necessarily compatible with a Swingarm 2.35, Multiarm 2.40, Duplex 4.55 or Alu Track 4.40/2.35. Older two-post lifts such as the Eco Lift 2.35, EL235 or PL 2.30A may also use different support plates and lifting pads.
Uni and flat-track in-ground lifts commonly use rubber pyramids or rectangular rubber support pads. Swingarm lifts, on the other hand, frequently require plug-in adapters, plug-in adapter extensions, V-blocks, U-shaped supports, wheel gripper supports or pushAdapters. Therefore, always check which support system is actually installed on your HERRMANN lift before ordering.
Since support plates may vary depending on the year of manufacture, model version or previous repairs, you should always measure the existing support plate before placing an order. Compare all dimensions with the technical drawings and measurements shown on the respective product page. This helps prevent incorrect orders and allows you to identify the correct rubber support pad for your HERRMANN lift much more reliably.
HERRMANN rubber pads for in-ground lifts and older two-post lifts
Current HERRMANN in-ground lifts are commonly identified by model names such as Uni 2.35 plus, Swingarm 2.35, Swingarm 2.35-2530, Multiarm 2.40, Swingarm 2.50, Duplex 4.55, Duplex 4.65 and Alu Track. For these lifts, not only the model designation but also the type of vehicle support system is important.
For older HERRMANN two-post lifts, the most relevant models include Eco Lift 2.35, EcoLift 2.35, Eco 235, Eco Lift 2.30, EL 2.35, EL235, PL 2.30A, PL 2.30C, PL 2.35 and Aqualift 3000. These model names originate from older documentation, dealer catalogues, spare parts shops and used equipment listings. Therefore, always copy the model designation exactly as shown on the lift's identification plate.
Alternative spellings with one "r" omitted, such as Hermann rubber pad or Hermann lift spare parts, also appear in online searches. For proper identification, however, only the actual manufacturer and model information on the lift itself should be used. The determining factors are the support plate, support design, bore diameter, plug-in dimensions and the dimensions of the existing rubber support pad.
Not sure which part you need? We're happy to help.
You are welcome to contact us by email. For reliable identification we require photos of your lift's identification plate, a top view of the existing rubber pad, and the dimensions of the support plate.
The most important measurements are the diameter, height and—if the rubber pad has more than one mounting hole—the centre-to-centre hole spacing. For rectangular rubber support pads, the length, width and height are also required. For plug-in adapters, we additionally need the plug-in diameter, the overall height and the shape of the vehicle support.
It is also helpful to provide the model number, serial number, support design, bolt pattern, thread or locating pin details, as well as the condition of the old rubber support pad. We carefully compare your information with the available Böck® rubber pads, rubber support pads, plug-in adapters and lifting pads. Not sure which part you need? Simply send us the photos and measurements—we'll be happy to assist.
Böck® quality for workshops and lifting equipment
Rubber pads, rubber pyramids and rubber support pads are wear parts that are subjected to heavy use in everyday workshop operation. They protect the vehicle's lifting points, improve load distribution and replace worn support pad rubbers, damaged rubber pads or worn support blocks on the lift.
At Böck®, we focus on durable materials, high-quality workmanship and long service life under daily workshop conditions. We keep many common rubber support pads for HERRMANN lifts in stock, allowing worn components to be replaced quickly.
To ensure you order the correct replacement part, we always recommend comparing the existing component with the dimensions shown on the product page. When the model number, support design, dimensions and bolt pattern all match, the correct rubber support pad for your HERRMANN lift can be identified much more reliably.
FAQ
- 1. Which rubber pad fits my HERRMANN lift?
The correct part depends on the model number, lift design and support system. Always check the identification plate and measure the existing rubber pad or lifting pad. Photos and dimensions allow us to identify the correct Böck® rubber support pad much more reliably.
- 2. Are Eco Lift 2.35, EcoLift 2.35 and EL 2.35 the same?
Not necessarily. Eco Lift 2.35 is well documented as an older HERRMANN two-post lift. EL235 or EL 2.35 mainly appears in spare parts catalogues and compatibility lists. Always compare the identification plate, support system and dimensions before ordering.
- 3. Which HERRMANN rubber supports are most popular at Böck®?
The most frequently requested items include rubber pyramids, rectangular rubber support pads, rubber inserts and replacement pads for Uni, Swingarm and Eco Lift models. We keep many common versions in stock for fast delivery. However, comparing the new part with the existing component remains essential to ensure a perfect fit.
