Nussbaum is a German manufacturer of vehicle lifts for passenger cars and light commercial vehicles. Today, Nussbaum Automotive Lifts GmbH is headquartered in Kehl, Baden-Württemberg, Germany. Older documentation, nameplates and used vehicle lifts often still refer to the company as Nußbaum, Otto Nußbaum GmbH & Co. KG or Nußbaum Hebetechnik.
We supply rubber lift pads, rubber pads, rubber supports and rubber inserts for a wide range of Nussbaum vehicle lifts. These replacement parts are particularly common for older two-post lifts from the SL, SLE and SLU series. Many of these lifts use only a few common rubber lift pad versions. However, it is always essential to compare the replacement part with the existing support pad, as dimensions and mounting designs may vary depending on the production year, lift version or previously replaced support plate.
A suitable rubber pad for a Nussbaum vehicle lift should fit securely on the support pad, match the existing mounting system and meet high quality standards. The key specifications for selecting the correct rubber pad are diameter, height, bolt pattern and hole spacing. Detailed dimensions can be found on the corresponding product page.
Compatible lift models
We supply suitable rubber lift pads for the following Nussbaum lift models and series. The model designation provides initial guidance but should always be confirmed by comparing the dimensions of the existing support pad.
Popular older two-post lift models
- 2.25 ATL
- 2.30 SL
- 2.30 SLE
- 2.32 SL
- 2.32 SLE
- 2.32 SEL
- 2.35 SL
- 2.35 SLE
- 2.35 SLU
- 2.40 SL
- 2.40 SLE
- 2.40 SL U
- 2.50 SL
- 2.50 SLE
- Euro-Lift II
- HL 2.30 NT
- HL 2.40 NT
- SPL 3500
- SPL 4000
- 225 E
- HYMAX S 3000/3500/4000
Newer and current Nussbaum lift series
- SMART LIFT
- SMART LIFT 2.30 SL
- SMART LIFT 2.30 SL DT
- SMART LIFT 2.35 SL
- SMART LIFT 2.35 SL MM
- SMART LIFT 2.40 SL
- SMART LIFT 2.40 SL UNI
- SMART LIFT 2.50 SL
- SMART LIFT 2.50 SL DG
- POWER LIFT HF 3S
- POWER LIFT HF 3S 3500 DT
- POWER LIFT HF 3S 4000 UNI
- POWER LIFT SLH
- POWER LIFT SLH 3500 Advanced DT
- POWER LIFT SLH 5500 DG
- POWER LIFT HL SST
- POWER LIFT HL 6500 SST DG
- POWER LIFT HDL SST
- POWER LIFT HDL 7500 SST DG
Additional Nussbaum lift series
- JUMBO LIFT
- JUMBO LIFT 3500 NT
- JUMBO LIFT 4000 NT
- Jumbo Lift II NT
- UNI LIFT
- UNI LIFT NT
- UNI LIFT 3500 NT
- UNI LIFT 5000 NT
- Uni-Lift 3500 CLT
- SPRINTER Mobil
- SPRINTER Mobil 3200
- SPRINTER Mobil 3500
- COMBI LIFT
- COMBI LIFT 4.40 S
- COMBI LIFT 4.40 H
- COMBI LIFT 4.65 S
- COMBI LIFT 4.80 H
- 4.40H / 4 40 H
- TOP LIFT
- TOP LIFT 1.35 TLX
- TOP LIFT 2.35 TLK
- TOP LIFT 2.65 TLK
- TOP LIFT 4.40 TLA
- TOP LIFT 4.40 TLAD AMS
How to choose the correct rubber lift pad
As support pads may differ depending on the production year, lift version or installed support plate, you should always measure your existing support pad before ordering. Compare the dimensions with the technical drawings and specifications provided on the corresponding product page to avoid ordering the wrong part.
For rubber lift pads with multiple mounting holes, always measure the hole spacing from the centre of one hole to the centre of the next. This is the most reliable way to determine whether the replacement rubber pad matches your existing mounting plate.
Need help identifying the correct rubber pad?
You are also welcome to contact us by email. To identify the correct replacement part, please send us a photo of your lift's nameplate, a top-view photo of the existing rubber lift pad and the dimensions of the support pad. The most important measurements are the diameter, height and, if the rubber pad has more than one hole, the centre-to-centre hole spacing.
With this information we can identify the correct rubber lift pad for your Nussbaum vehicle lift much more reliably. Please check the dimensions carefully or send us the requested information if you are unsure which rubber pad you need.
As support pads may differ depending on the production year, lift version or installed support plate, you should always measure your existing support pad before ordering. Compare the dimensions with the technical drawings and specifications provided on the corresponding product page to avoid ordering the wrong part.
For rubber lift pads with multiple mounting holes, always measure the hole spacing from the centre of one hole to the centre of the next. This is the most reliable way to determine whether the replacement rubber pad matches your existing mounting plate.
You are also welcome to contact us by email. To identify the correct replacement part, please send us a photo of your lift's nameplate, a top-view photo of the existing rubber lift pad and the dimensions of the support pad. The most important measurements are the diameter, height and, if the rubber pad has more than one hole, the centre-to-centre hole spacing.
With this information we can identify the correct rubber lift pad for your Nussbaum vehicle lift much more reliably. Please check the dimensions carefully or send us the requested information if you are unsure which rubber pad you need.
