Werther International is an Italian manufacturer of workshop equipment and vehicle lifts. The brand is well known in many workshops for its 2-post lifts, scissor lifts, 4-post lifts, single-post lifts and mobile column lifts. When selecting suitable rubber pads and rubber lift pads for Werther lifts, the exact model designation is particularly important, as many models differ only by short suffixes, slashes or individual letters.
In this collection, you will find rubber pads for Werther vehicle lifts, compatible rubber lift pads, rubber supports and rubber pads for different support plates and lifting systems. We have clearly compiled the most frequently searched Werther models so that you can quickly check which rubber lift pad may be suitable for your vehicle lift.
For older Werther vehicle lifts in particular, it is worth checking the identification plate and the existing support plate carefully. Model codes such as 300S, 300SEV, 300S EV, 280A, 280 A or 210I/42BLUX can easily be confused. We therefore recommend checking not only the manufacturer name, but always comparing the model, dimensions and design.
Compatible models
For the following Werther models and series, we supply compatible rubber pads, rubber lift pads or lifting pads, or we check compatibility based on the existing dimensions. Listing a model does not automatically mean that every version uses the same rubber pad.
Werther 2-post lifts
- 254BF
- 254 BF
- 280A
- 280 A
- 301
- 301/32
- 301AD
- 300
- 300S
- 300 S
- 300SEV
- 300S EV
- 300SLB
- 305S
- 254S/4
- 232I
- 232IH
- 210I/32B
- 210I/42B
- 210I/42SMB
- 210I/32BLUX
- 210I/42BLUX
- 210I/42SMBLUX
- 208I/A
- 208I/5L
- 208I/55S
- 208I/55
- 208I/7
- 209I/A
- 209I/B
- 214I-A
- 214I-B
- 225 I
- 253/3
- 255
- W255
- W300
- 280AZ
Werther scissor lifts, mid-rise lifts and motorcycle lifts
- 260 B
- 260B
- 262
- 263
- 263/A
- 263/B HS
- 263B HS
- 263/35HS
- STRATOS
- STRATOS SRM
- STRATOS SRE
- STRATOS SRE/S
- STRATOS SR40
- STRATOS S39
- STRATOS S36
- WP35R
- WT40/4
- WL50/4
- SATURNUS
- SATURNUS 36R
- SATURNUS 40R
- SATURNUS 45
- SATURNUS EV45
- SATURNUS 50R
- WX60
- WML250
- WML600C
- WML600Q
- 258 IP Motorcycle Lift
- TRUCK 100GL – 200GL
Werther 4-post lifts and free-wheel lifts
- 436
- 442LP
- 443ATLT
- 443ATLT48
- 443LT - ATLT
- 444 ATLT
- 450AT
- 450-3DB
- 450AT/5
- 450ATLT
- 450ATLTPG
- 455-3DB
- 460
- 460AT
- 480
- 480AT
- 412
- 430BL
- 402M
- 402P
- 403M
- 403P
- 404M
- 404P
- 406P
- 496M
- 496P
- 496/3M
- 496/3P
- 528 4-Post Lift
Werther single-post lifts, mobile column lifts and older designations
- MM25
- MONOLIFT
- Monolift 800
- Monolift 1200
- ECOLIFT
- LTW55
- LTW75
- LTW85
- LTW100
- HI-9
- HI-11
- 230 I
- Duplex Single Post Parking Lift
- B-Power Parking Lift
- 262 Mid-Rise Wheels Free
- Atlas Heavy Duty Mobile Column Lift
- C 120
Choosing the right rubber pad for your Werther vehicle lift
As there may be differences depending on the year of manufacture, version or installed support plate, you should always measure the existing support plate before ordering. Compare the dimensions with the technical drawings and specifications on the respective product page to avoid incorrect orders.
The most important factors are diameter, height, design, existing holes and the type of mounting. On some Werther vehicle lifts, rubber pads may look similar at first glance but differ in the support or hole pattern. A quick comparison of the dimensions saves time in the workshop and helps prevent unnecessary returns.
Not sure which rubber pad fits?
You are welcome to contact us by email. For reliable identification, we need photos of the lift identification plate, a top view photo of the existing rubber pad and the dimensions of the support plate. The most important measurements are the diameter, height and, if the rubber pad has more than one hole, the centre-to-centre hole spacing.
We carefully compare your information with our available rubber pads for Werther vehicle lifts. This allows us to identify the correct rubber lift pad for your vehicle lift more reliably so that your equipment can remain in service.
Why buy Werther rubber pads from us?
As a specialist supplier of vehicle lift accessories, we do not rely solely on the manufacturer's name when identifying rubber pads. Instead, we focus on the actual design of the support plate. You benefit from clear dimensional information, technical drawings on every product page and a structured model overview. This is particularly helpful for Werther vehicle lifts, where older and newer model designations are often used in parallel.
Please compare the dimensions of your existing rubber pad before ordering or send us the required information by email. We will help you identify the correct rubber pad for your Werther vehicle lift.
Frequently asked questions about Werther rubber pads
1. Will every Werther rubber pad fit every Werther vehicle lift?
No. Even within the same manufacturer, support plates, production years and versions may differ. Therefore, always compare the dimensions of your existing support plate with the specifications shown on the product page.
2. Which dimensions are important when selecting a rubber pad?
The key measurements are the diameter, height, design and existing holes. If the rubber pad has more than one hole, we also require the centre-to-centre hole spacing.
3. What should I do if my Werther model number is unclear?
Please send us photos of the lift identification plate, a top view photo of the existing rubber pad and the dimensions of the support plate by email. We will then help identify the correct rubber pad for your vehicle lift.
