Rubber Pads for LAUNCH Automotive Lifts

LAUNCH is an internationally recognised manufacturer of workshop and diagnostic equipment. In the automotive lift sector, LAUNCH is particularly well known for its TLT model ranges. These include two-post lifts, four-post lifts and scissor lifts for professional workshop use.

For LAUNCH automotive lifts, we supply suitable rubber pads, rubber lift pads, rubber supports, support plates and replacement pads for various models. Replacement pads for models such as TLT-235 SBA, TLT-240 SCA, TLT-250 AT, TLT-330 A, TLT-330 M, TLT-640 A, TLT-855 A, TLT-450 JA, TLT-440 W and TLT-455 W are particularly frequently requested.

At Böck®, you will find durable premium rubber pads for LAUNCH automotive lifts that can reliably replace worn or damaged pads. Many common versions are available immediately and can be ordered conveniently online. The model list provides initial guidance. However, reliable product selection should always be based on a comparison with the existing support plate, the dimensions and the technical drawing on the respective product page.

Suitable LAUNCH Models

For the following LAUNCH models, we supply suitable rubber pads, rubber lift pads or relevant replacement parts. The model designations provide guidance when searching for the correct rubber pad, rubber support or suitable support plate.

LAUNCH Two-Post Lifts

• TLT-235 SBA
• TLT-235 SBA(E)
• TLT235SBA
• TLT235SBA(E)
• TLT235SBAE
• TLT 235 SBA
• TLT235SB
• TLT235SC
• TLT235SC(U)
• TLT235SCU
• TLT235SCA(U)
• TLT235SCAU
• TLT-240 SCA
• TLT240SCA
• TLT 240 SCA
• TLT240SC
• TLT240SBA
• TLT240SB
• TLTE-40 SCA
• TLT-40 SCA
• TLT-250 AT
• TLT250AT
• TLT245AT
• TLT260AT

LAUNCH Four-Post Lifts and Wheel Alignment Lifts

• TLT-450 JA
• TLT-455 W
• TLT455W
• TLT-440 W
• TLT440W
• TLT440

LAUNCH Scissor Lifts and Mid-Rise Lifts

• TLT-330 A
• TLT330A
• TLT-330 M
• TLT330M
• TLT-640 A
• TLT640A
• TLT-855 A
• TLT855A
• TLT840WA
• TLT840WAF
• TLT830WA
• TLT630A
• TLT632AF
• TLT630AF
• TLT635AF
• TLT635A
• Launch LT 235SBA
• LT 235SBA
• Launch TLT 235 SBA
• Launch TLT240SCA 4000 kg

How to Select the Correct Rubber Pad for a LAUNCH Lift

With LAUNCH automotive lifts, the exact model designation is particularly important because TLT models can appear in different spellings. A TLT-235 SBA, for example, may also be listed as TLT235SBA, TLT 235 SBA or even LT 235SBA in second-hand listings. For technical identification, however, the information on the lift's nameplate should always be used as the reference.

LAUNCH rubber pads and replacement lift pads for two-post lifts such as TLT-235 SBA, TLT-240 SCA, TLT-250 AT, TLT245AT and TLT260AT are particularly frequently requested. For these lifts, the diameter, height, plate shape, pins, threads, hole pattern and fastening system are decisive. Visually similar support plates may differ depending on the year of manufacture or version.

For four-post lifts and wheel alignment lifts such as TLT-450 JA, TLT-455 W, TLT455W, TLT-440 W or TLT440W, rubber supports are often required for axle jacks, crossbeams, additional lifting points or runway accessories. Before ordering, check whether you require a conventional rubber pad, a rubber block or a special support pad.

For scissor lifts such as TLT-330 A, TLT-330 M, TLT-640 A, TLT-855 A, TLT840WA, TLT840WAF, TLT630A or TLT632AF, rectangular rubber pads, rubber blocks or special support pads may be installed. The length, width, height and shape of the contact surface are particularly important.

As differences may occur depending on the year of manufacture, version or installed support plate, you should always measure the existing support plate yourself before ordering. Compare the dimensions with the technical drawings and measurements on the respective product page. This helps prevent incorrect orders and makes it much easier to identify the correct rubber pad for your LAUNCH automotive lift.

LAUNCH TLT Rubber Pads for Workshop and Service Use

Rubber pads and rubber supports on LAUNCH automotive lifts are typical wear parts. Daily use, vehicle weight, dirt, oil and ageing can cause the pads to become hard, cracked or damaged. Replacing them in good time helps protect the vehicle's lifting points and ensures a clean and reliable contact surface on the support plate.

On two-post lifts such as the TLT-235 SBA and TLT-240 SCA, the condition of the rubber lift pads is particularly important because the vehicle is lifted directly via the lifting arms. If the old rubber pads are damaged or heavily worn, they should be replaced before metal-to-metal contact or uneven contact surfaces occur.

On scissor lifts and drive-on lifts such as the TLT-640 A or TLT-855 A, rubber blocks and support pads are often the main components involved. The existing pads should always be measured directly. The model number alone is not always sufficient because platforms, additional lifting points and accessories can vary depending on the version.

Important Information Before Ordering

To identify the correct product reliably, we need photos of the automotive lift's nameplate, a top-view photo of the existing rubber pad and the dimensions of the support plate.

The diameter and height are particularly important. If the rubber pad has more than one hole, please also measure the centre-to-centre hole spacing. For rectangular rubber pads or rubber blocks, please provide the length, width and height. For support plates, information about pins, threads, holes, grooves, plate shape and fastening method is also important.

Photos of the old rubber pad from above, below and from the side are also helpful, as are details about the model number, serial number, lifting capacity and condition of the old rubber pad. The more precise this information is, the more reliably we can identify the correct Böck® rubber pad for your LAUNCH automotive lift.

Böck® Quality for LAUNCH Automotive Lifts

Rubber pads, rubber lift pads and rubber supports may be small components, but they are subjected to considerable loads in everyday workshop use. They help protect the vehicle's lifting points, improve the contact surface and replace worn or damaged pads on the automotive lift.

At Böck®, we focus on durable materials, precise manufacturing and high load capacity for everyday professional use. Our premium rubber pads for LAUNCH automotive lifts are designed to be robust and suitable for regular workshop operation.

Many common rubber pads for LAUNCH TLT automotive lifts are available immediately. This allows worn pads to be replaced quickly and conveniently ordered online. For reliable product selection, we always recommend comparing the replacement part with the existing component and the dimensions provided on the product page.

FAQ

• 1. Which rubber pads fit my LAUNCH TLT-235 SBA?
  The lift's nameplate, the shape of the support plate and the dimensions of the existing rubber pad are decisive. Search terms such as TLT-235 SBA, TLT235SBA and TLT 235 SBA may refer to the same model. Before ordering, always check the diameter, height, hole pattern, pins or threads directly on the existing part.
• 2. Does a rubber pad for the TLT-235 SBA also fit the TLT-240 SCA?
  Not necessarily. The model, year of manufacture, lifting arm and support plate may differ. Please compare the existing support plate with the dimensions and technical drawing on the product page before ordering.
• 3. Why choose Böck® rubber pads for LAUNCH automotive lifts?
  Böck® rubber pads and rubber supports are durable, robustly manufactured and designed for regular workshop use. Many common versions for LAUNCH TLT automotive lifts are available immediately and can be ordered conveniently online.