Rubber Supports for HH-INTERTECH Automotive Lifts

HH-INTERTECH, also known as Intertech A/S, is particularly relevant in the spare parts sector as a Danish supplier of older two-post lifts. Many of these lifts are still in use today in workshops, smaller businesses and private garages. Rubber pads, rubber supports, support plate rubbers and support plates for older models such as H225, H230, INT 302, INT 251, INT 2301, INT 2302 and HH231 are particularly frequently searched for.

For HH-INTERTECH automotive lifts, we offer suitable rubber pads, rubber supports, rubber lift supports, rubber lift pads, support plates and support plate rubbers for various model types. Especially with older lifts, careful identification is important, as the year of manufacture, support plate, lifting arm and existing rubber support may vary.

At Böck®, you will find durable premium rubber pads for HH-INTERTECH and Intertech automotive lifts. Many common versions are available immediately and can be conveniently ordered online. The model list provides an initial guide. However, to ensure the correct order, always compare the existing support plate, its dimensions and the technical drawing on the respective product page.

Compatible Models

We offer suitable rubber pads, rubber supports and relevant spare part versions for these HH-INTERTECH and Intertech models. The list is intended as a guide when searching for the correct support plate rubber, rubber lift support or suitable support plate.

H225, H230 and HH Models

• H 225
• HH 225
• H225
• HH225
• H 230
• HH 230
• H230
• HH230
• HH 231
• HH231
• Type HH 231
• H 235
• H235
• H 236
• H236

INT Models and Used-Market Designations

• INT 302
• INT302
• INT 251
• INT251
• INT 2301
• INT2301
• INT 2302
• INT2302

Other Spare Part and Type Designations

• 251
• 301
• 252
• 302
• P225
• P230

Relevant Dimensions and Product Terms

• Ø 124 mm
• Ø 158 mm
• Lift Pad 120 mm INT 251/302

Not Classified as Automotive Lift Models

• 650EV
• 1300EV

How to Choose the Correct Rubber Pad for HH-INTERTECH

With HH-INTERTECH, precise identification is particularly important because many of these lifts are older and their model history is not always documented consistently. A rubber support for H225 is not necessarily compatible with H230, INT 302, INT 251, INT 2301, INT 2302 or HH231. Even if individual spare parts sources list several models together, you should always check which support plate is actually installed on the automotive lift.

Technical data for H225 and H230 is available from older operating manuals. These specify a lifting capacity of 2,500 kg for the H225 and 3,000 kg for the H230. These models are particularly relevant when searching for spare parts, as customers frequently search specifically for HH Intertech H225 rubber pads, Intertech H230 rubber supports or HH 230 support plate rubbers.

Round rubber pads with diameters of Ø 124 mm and Ø 158 mm are documented for HH-INTERTECH. In addition, spare parts sources mention a 120 mm Lift Pad for INT 251/302. These dimensions are very useful when searching for the correct product, but they do not provide a general guarantee of compatibility. The decisive factor is always the support plate actually installed on your automotive lift.

As there may be differences depending on the year of manufacture, version or installed support plate, you should always measure the existing support plate yourself before ordering. Compare the dimensions with the technical drawings and measurements provided on the respective product page. This helps prevent incorrect orders and makes it significantly easier to identify the correct rubber support for your HH-INTERTECH automotive lift.

HH-INTERTECH Rubber Supports for Older Two-Post Lifts

For this collection, HH-INTERTECH is particularly relevant for older two-post lifts. The designations H225, H230, HH231, INT 302, INT 251, INT 2301 and INT 2302 are especially common in the spare parts and used-equipment market. Many of these lifts are still in use and require wear parts such as rubber pads, support plates, load-bearing nuts, safety nuts, guide rollers or control cables.

Rubber pads and support plate rubbers on older Intertech automotive lifts are typical wear parts. Daily use, vehicle weight, oil, dirt and ageing can cause the supports to become hard, cracked or damaged. Timely replacement protects the vehicle’s lifting points and ensures proper contact with the support plate.

On older lifts, support plates, lifting arms or lifting supports may have been replaced over the years. For this reason, an HH-INTERTECH rubber pad should not be ordered based solely on the manufacturer name. Important factors include the outer diameter, height, inner dimension, shoulder dimension, plate diameter, hole pattern and shape of the existing lifting support.

Important Information Before Ordering

Alternatively, you are welcome to contact us by email. For reliable identification, we require photos of the automotive lift nameplate, a top-view photo of the existing rubber pad and the dimensions of the support plate.

The most important measurements are the diameter, height and, if the rubber pad has more than one hole, the centre-to-centre hole spacing. For older HH-INTERTECH support plates, the inner dimension, shoulder dimension, plate diameter, hole pattern, slip-over dimension and mounting type are also important.

Photos of the old rubber pad from the top, bottom and side are also helpful, as well as a photo of the metal support plate showing the mounting system and information about the model number, year of manufacture, lifting capacity and condition of the old rubber support. The more precise this information is, the more reliably we can identify the correct Böck® rubber pad for your HH-INTERTECH automotive lift.

Böck® Quality for HH-INTERTECH Automotive Lifts

Rubber pads, support plate rubbers and rubber supports are wear parts that are regularly subjected to high loads in everyday workshop use. They protect the vehicle’s lifting points, improve the contact surface and replace hardened or damaged supports on the automotive lift.

At Böck®, we focus on durable materials, precise workmanship and high load capacity for everyday use. Our premium rubber pads for older HH-INTERTECH and Intertech automotive lifts are robustly designed and intended for regular workshop use.

We keep many common rubber supports for older two-post lifts available from stock. This means worn HH-INTERTECH supports can be replaced quickly and conveniently ordered online. To ensure you order the correct product, we always recommend comparing it with the existing part and the dimensions provided on the product page.

FAQ

• 1. Which rubber pad fits my HH-INTERTECH automotive lift?
  The key factors are the nameplate, model number, existing support plate and dimensions of the old rubber support. With older HH-INTERTECH lifts, the manufacturer name alone is often not sufficient. Please compare the diameter, height, inner dimension, shoulder dimension and hole pattern with the existing part.
• 2. Are different rubber supports available for HH-INTERTECH?
  Yes. For HH-INTERTECH, references to Ø 124 mm and Ø 158 mm rubber pads are documented. A 120 mm Lift Pad for INT 251/302 is also mentioned. Please do not order based solely on the model name; always check the existing support plate and its dimensions.
• 3. Why order Böck® rubber pads for HH-INTERTECH?
  Böck® rubber pads are durable, robustly manufactured and designed for regular workshop use. We keep spare parts for HH-INTERTECH and Intertech two-post lifts in stock, making them immediately available and convenient to order online.