Rubber Supports for MAJORLIFT Automotive Lifts

LAUNCH is an internationally recognised manufacturer of workshop and diagnostic equipment. In the automotive lift sector, LAUNCH is particularly well known for its TLT model ranges. These include two-post lifts, four-post lifts and scissor lifts for professional workshop use.

For LAUNCH automotive lifts, we offer suitable rubber pads, rubber supports, rubber lift supports, lifting pads, support plates and replacement rubber pads for various models. Replacement pads for models such as TLT-235 SBA, TLT-240 SCA, TLT-250 AT, TLT-330 A, TLT-330 M, TLT-640 A, TLT-855 A, TLT-450 JA, TLT-440 W and TLT-455 W are particularly popular.

At Böck®, you will find durable premium rubber pads for LAUNCH automotive lifts that reliably replace worn or damaged pads. Many common versions are available immediately and can be conveniently ordered online. The model list provides an initial guide. However, to ensure you order the correct product, always compare the existing support plate, its dimensions and the technical drawing on the respective product page.

Compatible Models

For these LAUNCH models, we offer suitable rubber pads, rubber supports and relevant replacement parts. The model names provide guidance when searching for the correct rubber pad, rubber lift support or suitable support plate.

LAUNCH Two-Post Lifts

• TLT-235 SBA
• TLT-235 SBA(E)
• TLT235SBA
• TLT235SBA(E)
• TLT235SBAE
• TLT 235 SBA
• TLT235SB
• TLT235SC
• TLT235SC(U)
• TLT235SCU
• TLT235SCA(U)
• TLT235SCAU
• TLT-240 SCA
• TLT240SCA
• TLT 240 SCA
• TLT240SC
• TLT240SBA
• TLT240SB
• TLTE-40 SCA
• TLT-40 SCA
• TLT-250 AT
• TLT250AT
• TLT245AT
• TLT260AT

LAUNCH Four-Post Lifts and Wheel Alignment Lifts

• TLT-450 JA
• TLT-455 W
• TLT455W
• TLT-440 W
• TLT440W
• TLT440

LAUNCH Scissor Lifts and Mid-Rise Lifts

• TLT-330 A
• TLT330A
• TLT-330 M
• TLT330M
• TLT-640 A
• TLT640A
• TLT-855 A
• TLT855A
• TLT840WA
• TLT840WAF
• TLT830WA
• TLT630A
• TLT632AF
• TLT630AF
• TLT635AF
• TLT635A
• Launch LT 235SBA
• LT 235SBA
• Launch TLT 235 SBA
• Launch TLT240SCA 4000 kg

How to Choose the Correct Rubber Pad for LAUNCH

For LAUNCH, the exact model designation is particularly important because TLT models can appear under different spellings. A TLT-235 SBA, for example, may also be listed as TLT235SBA, TLT 235 SBA or even LT 235SBA in used-equipment listings. For technical identification, however, the information on the automotive lift’s nameplate is always decisive.

LAUNCH rubber pads for two-post lifts such as TLT-235 SBA, TLT-240 SCA, TLT-250 AT, TLT245AT and TLT260AT are particularly popular. For these lifts, diameter, height, plate shape, pins, threads, hole pattern and mounting system are important. Support plates that look similar can differ depending on the year of manufacture or version.

For four-post lifts and wheel alignment lifts such as TLT-450 JA, TLT-455 W, TLT455W, TLT-440 W or TLT440W, rubber supports are often required for axle jacks, cross beams, additional supports or runway accessories. Before ordering, check whether a standard rubber pad, a rubber block or a special support is required.

On scissor lifts such as TLT-330 A, TLT-330 M, TLT-640 A, TLT-855 A, TLT840WA, TLT840WAF, TLT630A or TLT632AF, rectangular rubber supports, rubber blocks or special lifting pads may be used. Length, width, height and the shape of the contact surface are the key dimensions.

As differences may occur depending on the year of manufacture, version or installed support plate, you should always measure the existing support plate before ordering. Compare the dimensions with the technical drawings and measurements on the respective product page. This helps prevent incorrect orders and makes it much easier to identify the correct rubber support for your LAUNCH automotive lift.

LAUNCH TLT Rubber Supports for Workshop and Service

Rubber pads and rubber supports on LAUNCH automotive lifts are typical wear parts. Daily use, vehicle weight, dirt, oil and ageing can cause the supports to become hard, cracked or damaged. Replacing them in good time helps protect the vehicle’s lifting points and ensures proper contact with the support plate.

On two-post lifts such as TLT-235 SBA and TLT-240 SCA, the condition of the rubber pads is particularly important because the vehicle is lifted directly by the lifting arms. If the old rubber pads are damaged or heavily worn, they should be replaced before metal-to-metal contact or uneven contact surfaces occur.

On scissor lifts and drive-on lifts such as TLT-640 A or TLT-855 A, rubber blocks and lifting pads are often used. The existing supports should always be measured directly. The model number alone is not always sufficient, as platforms, additional supports and accessories may vary depending on the version.

Important Information Before Ordering

For reliable identification, we require photos of the automotive lift’s nameplate, a top-view photo of the existing rubber pad and the dimensions of the support plate.

The most important dimensions are the diameter and height. If the rubber pad has more than one hole, we also require the centre-to-centre hole spacing. For rectangular rubber supports or rubber blocks, please also provide the length, width and height. For support plates, pins, threads, holes, grooves, plate shape and mounting system are also important.

Photos of the old rubber component from the top, bottom and side are also helpful, along with details of the model number, serial number, lifting capacity and condition of the existing rubber support. The more precise this information is, the more reliably we can identify the correct Böck® rubber pad for your LAUNCH automotive lift.

Böck® Quality for LAUNCH Automotive Lifts

Rubber pads and rubber supports are small components, but they are subjected to heavy loads in everyday workshop use. They protect the vehicle’s lifting points, improve the contact surface and replace worn or damaged pads on the automotive lift.

At Böck®, we focus on durable materials, precise workmanship and high load capacity for everyday use. Our premium rubber pads for LAUNCH automotive lifts are robust and designed for regular professional workshop use.

Many common rubber supports for LAUNCH TLT automotive lifts are available immediately. This allows worn supports to be replaced quickly and conveniently ordered online. To ensure you order the correct product, we always recommend comparing the existing part with the dimensions provided on the product page.

FAQ

• 1. Which rubber pads fit my LAUNCH TLT-235 SBA?
  The nameplate, support plate shape and dimensions of the existing rubber support are decisive. The spellings TLT-235 SBA, TLT235SBA and TLT 235 SBA may refer to the same model in search queries. Before ordering, always check the diameter, height, hole pattern, pins or threads directly on the existing part.
• 2. Does a rubber pad for the TLT-235 SBA also fit the TLT-240 SCA?
  Not necessarily. The model, year of manufacture, lifting arm and support plate may differ. Please compare the existing support plate with the dimensions and technical drawing on the product page before ordering.
• 3. Why order Böck® rubber pads for LAUNCH automotive lifts?
  Böck® rubber pads and rubber supports are durable, robust and des