Rubber Supports for OMCN Automotive Lifts

(3 products)

OMCN S.p.A. is an Italian manufacturer of workshop and industrial equipment based in Villa di Serio near Bergamo. The brand has been active in the workshop equipment sector since 1958 and offers a wide range of automotive lifts, industrial equipment, motorcycle lifts, mobile wheel grippers and accessories.

For OMCN automotive lifts, we offer suitable rubber pads, rubber supports, rubber lift supports, rubber lift pads, support plates, adapters and support plate rubbers for various models. The two-post lifts of the OMCN 199 series are particularly relevant, as many workshops specifically search for rubber pads, support plates and support plate rubbers for these models.

At Böck®, you will find durable premium rubber pads and robust rubber supports for OMCN automotive lifts. Many common versions are available immediately and can be conveniently ordered online. The model list provides an initial guide. However, a reliable selection should always be made by comparing the existing support plate, its dimensions and the technical drawing on the respective product page.

Compatible Models

For these OMCN models, we offer suitable rubber pads, rubber supports, adapters or relevant replacement part options. The list serves as a guide when searching for the correct support plate rubber, rubber lift support, adapter or suitable support plate.

OMCN 199 Series, Electrohydraulic Two-Post Lifts

199/YL
199/YP
199/V
199/W
199/X
199/WRX
199/WL

OMCN 199 Series, Electromechanical Two-Post Lifts

199/U
199/UE
199/DELTA
199/BETA
199/GK
199/GAMMA
199/ALFA
199/R
199/RX
199/RY
199/T
199/TE
199/RL
199/DK

Used-Market Spellings and Older Designations

199U
199/C
199 C
199UE2
199/gk3
199/GK3

OMCN Accessory Numbers for Adapters, Rubber Pads and Supports

370
370/A
370/B
370/C
370/D
370/E
370/F
A370
B370
C370
A199/R
B199/R
C199/R
D199/R
E199/R
F199/R
G199/R
H199/R
I199/R
J199/R

Inground and Piston Lifts

2035/XY
2035/L
2055/L
2000/C
2000/E
2000/F

Double-Scissor, Short-Rise and Bodywork Lifts

705
705/M
730
718
719
718/M
719/M
551
551/I
552
553
541
541/IP
543
540/A
550
550/A

Scissor Lifts and X-LINE Models

820
821
822
823
824
825
826
800
801
802
803
804
805
810
811
812
813
814
815
890
891
892
893
894
895
896
X-LINE 860
X-LINE 861
X-LINE 862
X-LINE 863
X-LINE 864
X-LINE 865
X-LINE 866

OMCN Rubber Supports for Scissor Lifts and X-LINE Lifts

715
715/A
715/B
715/C
715/D
715/E

Four-Post Lifts

401
401/I
401/L
401/C
401/CSAI
402/LS
403
403/LS
403/LSI
403/BSAI
403/C
403/CSAI

Heavy-Duty Commercial Vehicle Lifts

Commercial Vehicle Scissor Lifts and Coupled Systems

900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
910+910
911+911
912+912
913+913

Mobile Wheel Grippers

952
953
953/A
953/B
959
959/A
959/B
963
963/A
963/B
995+983/FM
995/A+983/FM
995/B+983/FM
995W+983/FM
995W/A+983/FM
995W/B+983/FM

Motorcycle Lifts

196/P
196/PI
196/PL
196/PL-SP
196/MS
196/MS-SP
196/NS
196/OS
196/OSL
196/OSL-SP

Additional Dimension and Replacement-Part Search Terms

OMCN rubber buffer 140 mm
OMCN rubber buffer 145 mm
OMCN Tamponi gomma
OMCN rubber pads
OMCN load-bearing nut
OMCN lifting nut

How to Choose the Correct Rubber Pad for OMCN 199

For OMCN, the exact model designation is particularly important because the 199 series includes many different versions. A rubber support for 199/U does not necessarily fit 199/UE, 199/GK, 199/R, 199/YL, 199/X or 199/WL. Accessory numbers such as 370, 370/B, 370/D, A199/R or I199/R should also always be compared with the existing adapter or support plate.

Rubber pads and support plate rubbers for the models 199/YL, 199/YP, 199/V, 199/W, 199/X, 199/WRX, 199/WL, 199/U, 199/UE, 199/GK, 199/GAMMA, 199/ALFA, 199/R, 199/RX and 199/RY are particularly frequently requested. For these automotive lifts, the diameter, height, support plate shape, pin, thread, hole pattern and mounting system are decisive.

On the used-equipment market, OMCN model numbers are often written differently. For example, 199/U may be written as 199U, 199/C as 199 C, and 199/GK as 199/gk3 or 199/GK3. For correct technical identification, however, the information on the nameplate and the lifting support actually installed on the automotive lift are always decisive.

As differences may occur depending on the year of manufacture, version or installed support plate, you should always measure the existing support plate yourself before ordering. Compare the dimensions with the technical drawings and measurements on the respective product page. This helps prevent incorrect orders and makes it much easier to reliably identify the correct rubber support for your OMCN automotive lift.

OMCN Rubber Supports for Scissor Lifts and X-LINE

In addition to the 199 series, OMCN scissor lifts, double-scissor lifts, short-rise models and X-LINE lifts are particularly relevant. These often do not require conventional round rubber pads, but rather rectangular rubber supports, rubber blocks, support pads or special supports for bodywork and service applications.

For OMCN scissor lifts and X-LINE models, the rubber supports 715, 715/A, 715/B, 715/C, 715/D and 715/E are important search and replacement-part numbers. Depending on the lift, vehicle type and lifting point, different heights, widths and contact surfaces may be suitable.

At Böck®, you will find a wide selection of robust rubber blocks and rubber supports for scissor lifts. These include different heights, wide standard supports for everyday workshop use, special blocks for electric vehicles and versions with smaller lifting surfaces for vehicles with narrow or small lifting points. The decisive factor remains the comparison with the lift, platform and vehicle lifting point.

OMCN Support Plates, Adapters and Accessory Numbers

OMCN uses its own accessory numbers for many supports and adapters. These include 370, 370/A, 370/B, 370/C, 370/D, 370/E, 370/F, A370, B370, C370 as well as the 199/R accessory numbers A199/R, B199/R, C199/R, D199/R, E199/R, F199/R, G199/R, H199/R, I199/R and J199/R.

These numbers are very useful when searching for replacement parts, but should not be considered in isolation. An adapter, rectangular rubber support, wedge-shaped rubber support or support plate must match the existing lift, lifting arm and support design. Especially with older 199 models, it is advisable to check the nameplate and the existing support plate.

Search terms such as OMCN Tamponi gomma, OMCN rubber pads, OMCN rubber buffer 140 mm or OMCN rubber buffer 145 mm can also be helpful when searching for replacement parts. However, these terms from the replacement-parts market do not provide a general guarantee of compatibility. The dimensions and design of the existing part remain decisive.

Important Information Before Ordering

For reliable identification, we require photos of the automotive lift’s nameplate, a top-view photo of the existing rubber pad and the dimensions of the support plate.

The most important measurements are the diameter and height and, if the rubber pad has more than one hole, the centre-to-centre hole spacing. For rectangular rubber supports, wedge-shaped rubber supports or rubber blocks, the length, width and height are also helpful. For support plates and adapters, the pin, thread, bore, groove, support plate shape and mounting type are also important.

Photos of the old rubber part from above, below and from the side are also helpful, as are details of the model number, serial number, lifting capacity and condition of the old rubber support. The more precise this information is, the more reliably we can identify the correct Böck® rubber pad or Böck® rubber support for your OMCN automotive lift.

Böck® Quality for OMCN Automotive Lifts

Rubber pads, support plate rubbers, adapter supports and rubber blocks are wear parts that are subjected to regular loads in everyday workshop use. They protect the vehicle’s lifting points, improve the contact surface and replace worn or damaged supports on the automotive lift.

At Böck®, we focus on durable materials, clean workmanship and high load capacity for everyday use. Our premium rubber pads for OMCN automotive lifts are designed to be robust and suitable for regular workshop operation.

Many common rubber supports for OMCN 199 lifts, scissor lifts and X-LINE applications are available immediately. This allows worn supports to be replaced quickly and conveniently ordered online. For reliable ordering, we always recommend comparing the existing part with the dimensions provided on the product page.

FAQ

1. Which OMCN rubber pads fit the 199 series?
The model version, nameplate, support plate and dimensions of the existing rubber support are decisive. The 199 series includes models such as 199/YL, 199/YP, 199/V, 199/W, 199/X, 199/U, 199/UE, 199/GK, 199/R, 199/RX and 199/RY. Always compare the diameter, height, hole pattern, pin or thread with the existing part.
2. Are accessory numbers such as OMCN 370 or A199/R sufficient for identification?
These numbers are very helpful, but are not always sufficient on their own. Depending on the automotive lift, year of manufacture and lifting support, adapters, wedge-shaped rubber supports, support plates or rectangular rubber supports may differ. The dimensions and existing lifting support should always be checked.
3. Which rubber supports are suitable for OMCN scissor lifts?
For OMCN scissor lifts, 715, 715/A, 715/B, 715/C, 715/D and 715/E are particularly relevant. Depending on the intended use, vehicle to be lifted and individual requirements, Böck® offers many rubber blocks in different heights, shapes and contact surfaces. Rubber blocks for electric vehicles or vehicles with small lifting points are also available.
View the Böck® rubber block range

FiltersFilter & Sort